Comments for Dobby's World http://dobbylove.wordpress.com Welcome ~ ! ~^^~ Mon, 13 Apr 2009 23:50:58 +0000 http://wordpress.com/ hourly 1 Comment on NS-MIRACLE: Multi-InteRfAce Cross-Layer Extension library for the NS2 by Xiaofei Wang http://dobbylove.wordpress.com/2008/07/06/ns-miracle-multi-interface-cross-layer-extension-library-for-the-ns2/#comment-28 Xiaofei Wang Mon, 13 Apr 2009 23:50:58 +0000 http://dobbylove.wordpress.com/2008/07/06/ns-miracle-multi-interface-cross-layer-extension-library-for-the-ns2/#comment-28 Hi... 1. English plz.... 2. I stopped this site long time ago, please visit lovefei.com Thanks a lot : ) Hi…
1. English plz….
2. I stopped this site long time ago, please visit lovefei.com

Thanks a lot : )

]]> Comment on NS-MIRACLE: Multi-InteRfAce Cross-Layer Extension library for the NS2 by salma http://dobbylove.wordpress.com/2008/07/06/ns-miracle-multi-interface-cross-layer-extension-library-for-the-ns2/#comment-27 salma Mon, 13 Apr 2009 21:49:44 +0000 http://dobbylove.wordpress.com/2008/07/06/ns-miracle-multi-interface-cross-layer-extension-library-for-the-ns2/#comment-27 je suis débutante en ns2 et maintenant j'ai installé le ns2-miracle mais je ne sais pas comment l'utiliser. svp, est ce que vous pouvez m'aider de le manipuler et surtout pour assurer une communication entre la couche transport et la couche liaison? merci bcp salmabh_rt@yahoo.fr je suis débutante en ns2 et maintenant j’ai installé le ns2-miracle mais je ne sais pas comment l’utiliser. svp, est ce que vous pouvez m’aider de le manipuler et surtout pour assurer une communication entre la couche transport et la couche liaison?
merci bcp
salmabh_rt@yahoo.fr

]]> Comment on About Me by Xiaofei Wang http://dobbylove.wordpress.com/about/#comment-25 Xiaofei Wang Tue, 07 Apr 2009 08:58:14 +0000 #comment-25 Hi, I think if you search my posts about Hyacinth, it will be easy for you to start your work. What you need to do is just to follow the instructions. Good Luck! BTW: Again, please visit lovefei.com I will not come to this site any more. ^^ Hi, I think if you search my posts about Hyacinth, it will be easy for you to start your work. What you need to do is just to follow the instructions.

Good Luck!

BTW: Again, please visit lovefei.com I will not come to this site any more. ^^

]]> Comment on About Me by Xiaofei Wang http://dobbylove.wordpress.com/about/#comment-24 Xiaofei Wang Tue, 07 Apr 2009 08:57:38 +0000 #comment-24 Hi, I think if you search my posts about Hyacinth, it will be easy for you to start your work. What you need to do is just to follow the instructions. Good Luck! Hi, I think if you search my posts about Hyacinth, it will be easy for you to start your work. What you need to do is just to follow the instructions.

Good Luck!

]]> Comment on About Me by Manickam http://dobbylove.wordpress.com/about/#comment-23 Manickam Tue, 07 Apr 2009 08:46:06 +0000 #comment-23 Hi Wang, Nice to come again here. I'm working in NS2 for implementing HIGH THROUGUPUT in WIRELESS MESH NETWORK. But, i'm helpless anymore. I'm working in ns2.27 (cygwin). Even i'm going through MrRaniwala's Hyacinth. Many thing i couldn't understand. If you could guide i will be much greatful on this. Simply i want to implent the MESH NETWORK and compare the throughput. So then after i can improve the rest. Regards Manickam Hi Wang,
Nice to come again here. I’m working in NS2 for implementing HIGH THROUGUPUT in WIRELESS MESH NETWORK. But, i’m helpless anymore. I’m working in ns2.27 (cygwin). Even i’m going through MrRaniwala’s Hyacinth. Many thing i couldn’t understand. If you could guide i will be much greatful on this.

Simply i want to implent the MESH NETWORK and compare the throughput. So then after i can improve the rest.

Regards
Manickam

]]> Comment on About Me by Xiaofei Wang http://dobbylove.wordpress.com/about/#comment-22 Xiaofei Wang Wed, 25 Mar 2009 12:57:10 +0000 #comment-22 Hey. Thank you very much. Please see my new site : lovefei.com And hope we can help each other furthermore ; ) Hey. Thank you very much.

Please see my new site : lovefei.com

And hope we can help each other furthermore ; )

]]> Comment on About Me by Manickam http://dobbylove.wordpress.com/about/#comment-21 Manickam Wed, 25 Mar 2009 11:56:45 +0000 #comment-21 Hi Xiaofei Wang, Just i was surfing about MULTI RADIO - MULTI CHANNEL design for my project through google. All the way i gone through your profile...!!! wow... what a realistic and enchanting feel you have...!!! Some of the people trying to find mistake on others and feel "what a boring life?"...!!! but you have a positive attitude what ever u do...!!! Its great and keep it up... Have fun. Regards Manickam Hi Xiaofei Wang,
Just i was surfing about MULTI RADIO – MULTI CHANNEL design for my project through google. All the way i gone through your profile…!!! wow… what a realistic and enchanting feel you have…!!! Some of the people trying to find mistake on others and feel “what a boring life?”…!!! but you have a positive attitude what ever u do…!!! Its great and keep it up… Have fun.

Regards
Manickam

]]> Comment on "Hyacinth"的Multi-Channel & Multi-Interface 方法 for ns2.29 by Xiaofei Wang http://dobbylove.wordpress.com/2008/07/04/hyacinth%e7%9a%84multi-channel-multi-interface-%e6%96%b9%e6%b3%95-for-ns229/#comment-10 Xiaofei Wang Wed, 06 Aug 2008 05:39:37 +0000 http://dobbylove.wordpress.com/2008/07/04/hyacinth%e7%9a%84multi-channel-multi-interface-%e6%96%b9%e6%b3%95-for-ns229/#comment-10 你好,不好意思才看到你的留言,我的博客迁到dobby143.com了,所以这里不来看了. 你的问题我没有遇到, 无论是multich-tag.tcl还是twoflows-2channel.tcl都没错. 建议你仔细查一下修改的地方对不对,特别是空格, tab这类东西很烦人.而且貌似2.29有3个版本.我用的是2.29.3. 你好,不好意思才看到你的留言,我的博客迁到dobby143.com了,所以这里不来看了.

你的问题我没有遇到, 无论是multich-tag.tcl还是twoflows-2channel.tcl都没错.

建议你仔细查一下修改的地方对不对,特别是空格, tab这类东西很烦人.而且貌似2.29有3个版本.我用的是2.29.3.

]]> Comment on "Hyacinth"的Multi-Channel & Multi-Interface 方法 for ns2.29 by wunyuan http://dobbylove.wordpress.com/2008/07/04/hyacinth%e7%9a%84multi-channel-multi-interface-%e6%96%b9%e6%b3%95-for-ns229/#comment-9 wunyuan Mon, 04 Aug 2008 09:41:09 +0000 http://dobbylove.wordpress.com/2008/07/04/hyacinth%e7%9a%84multi-channel-multi-interface-%e6%96%b9%e6%b3%95-for-ns229/#comment-9 您好 有一些問題想請教您 同樣的我將NS2.29照著上面的教學修改 然後我去跑Hyacinth底下的multich-tag.tcl或是上面教學的實驗時 卻都出現錯誤導致所產生的.tr .nam都是0kb 以下錯誤內容show出來 num_nodes is set 25 (_o1015 cmd line 1) invoked from within "_o1015 cmd addr" invoked from within "catch "$self cmd $args" ret" invoked from within "if [catch "$self cmd $args" ret] { set cls [$self info class] global errorInfo set savedInfo $errorInfo error "error when calling class $cls: $args" $..." (procedure "_o1015" line 2) (SplitObject unknown line 2) invoked from within "_o1015 addr" ("eval" body line 1) invoked from within "eval $node addr $args" ("default" arm line 2) invoked from within "switch -exact $routingAgent_ { DSDV { set ragent [$self create-dsdv-agent $node] } DSR { $self at 0.0 "$node start-dsr" } AODV { set ragent [$self cre..." (procedure "_o3" line 11) (Simulator create-wireless-node line 11) invoked from within "_o3 create-wireless-node" ("eval" body line 1) invoked from within "eval $self create-wireless-node $args" (procedure "_o3" line 23) (Simulator node line 23) invoked from within "$ns_ node" invoked from within "set node_(0) [$ns_ node]" (file "channel-route.tcl" line 6) invoked from within "source.orig channel-route.tcl" ("uplevel" body line 1) invoked from within "uplevel source.orig [list $fileName]" invoked from within "if [$instance_ is_http_url $fileName] { set buffer [$instance_ read_url $fileName] uplevel eval $buffer } else { uplevel source.orig [list $fileName] ..." (procedure "source" line 8) invoked from within "source channel-route.tcl" (file "multich-tag.tcl" line 124) 不知道您是否有遇過跟我同樣的情況？ 您好
有一些問題想請教您
同樣的我將NS2.29照著上面的教學修改
然後我去跑Hyacinth底下的multich-tag.tcl或是上面教學的實驗時
卻都出現錯誤導致所產生的.tr .nam都是0kb
以下錯誤內容show出來
num_nodes is set 25

(_o1015 cmd line 1)
invoked from within
“_o1015 cmd addr”
invoked from within
“catch “$self cmd $args” ret”
invoked from within
“if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error “error when calling class $cls: $args” $…”
(procedure “_o1015″ line 2)
(SplitObject unknown line 2)
invoked from within
“_o1015 addr”
(“eval” body line 1)
invoked from within
“eval $node addr $args”
(“default” arm line 2)
invoked from within
“switch -exact $routingAgent_ {
DSDV {
set ragent [$self create-dsdv-agent $node]
}
DSR {
$self at 0.0 “$node start-dsr”
}
AODV {
set ragent [$self cre..."
(procedure "_o3" line 11)
(Simulator create-wireless-node line 11)
invoked from within
"_o3 create-wireless-node"
("eval" body line 1)
invoked from within
"eval $self create-wireless-node $args"
(procedure "_o3" line 23)
(Simulator node line 23)
invoked from within
"$ns_ node"
invoked from within
"set node_(0) [$ns_ node]”
(file “channel-route.tcl” line 6)
invoked from within
“source.orig channel-route.tcl”
(“uplevel” body line 1)
invoked from within
“uplevel source.orig [list $fileName]”
invoked from within
“if [$instance_ is_http_url $fileName] {
set buffer [$instance_ read_url $fileName]
uplevel eval $buffer
} else {
uplevel source.orig [list $fileName]
…”
(procedure “source” line 8)
invoked from within
“source channel-route.tcl”
(file “multich-tag.tcl” line 124)

不知道您是否有遇過跟我同樣的情況？

]]> Comment on 很有用的ns2的相关处理工具 by Anonymous http://dobbylove.wordpress.com/2008/07/06/%e5%be%88%e6%9c%89%e7%94%a8%e7%9a%84ns2%e7%9a%84%e7%9b%b8%e5%85%b3%e5%a4%84%e7%90%86%e5%b7%a5%e5%85%b7/#comment-2 Anonymous Sun, 06 Jul 2008 04:14:00 +0000 http://dobbylove.wordpress.com/2008/07/06/%e5%be%88%e6%9c%89%e7%94%a8%e7%9a%84ns2%e7%9a%84%e7%9b%b8%e5%85%b3%e5%a4%84%e7%90%86%e5%b7%a5%e5%85%b7/#comment-2 不错不错~~ 不错不错~~

]]>